Botroniq

HC-05 Bluetooth Module ( Pack of 25)

HC-05 Bluetooth Module ( Pack of 25)

₹6,599 (incl. GST) · Out of stock

Brand: Botroniq · Category: Bluetooth/BLE/Beacon

Description

HC-05 Bluetooth Module A well-liked module like the HC-05 Bluetooth can give your projects two-way (full-duplex) wireless connectivity. With the help of HC-05, you can connect with any Bluetooth-enabled device, such as a phone or laptop, or with two microcontrollers like an Arduino , Node MCU ESP32 etc. and it requires bread boards , jumper wires to connect.

Since the module uses USART to communicate, it is simple to connect to any microcontroller that supports USART. We can also set the HC-05 Bluetooth module's default values using the command mode. Therefore, this HC-05 module can be the best option for you if you're seeking a wireless module that can send data from your computer or mobile phone to a microcontroller or vice versa.

The HC-05 Bluetooth Module with Baseplate is a slave-only device. This means that it can connect to most phones and computers with Bluetooth but it cannot connect to another slave-only device such as keyboards and other HC-06 modules . To connect with other slave devices a master module would be necessary such as the HC-05 module ,which can do both master and slave.

The slave mode in HC-05 Bluetooth cannot initiate a connection to another Bluetooth device but can accept connections. Master mode can initiate a connection to other devices. Key Features: Working current: matching for 30 mA, matching the communication for 8 mA. With the computer and Bluetooth adapter, PDA, seamless connection equipment. 0 protocol standards. Potter default rate of 9600, the user can be set up.

1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps. Security: Authentication and encryption. Profiles: Bluetooth serial port. HC-05 Bluetooth Module Pin Diagram: Bluetooth Module Pin Description HC-05 Bluetooth Module Pin Description: Pin Number Pin Name Description 1 Enable / Key This pin is used to switch between command mode (set low) and Data Mode (set high).

The default setting of this HC 05 Bluetooth module is Data Mode. 2 Vcc This pin can be used to power the Bluetooth module. It has an operating voltage of +5V DC. 3 Ground Connect the module's ground pin to the Microcontroller’s Ground Pin (GND). 4 TX – Transmitter Sends serial data to the MCU. This pin will distribute all Bluetooth data in the form of serial data to the Microcontroller.

5 RX – Receiver Obtain Serial Data. This pin will transmit all serial data that is provided to it over Bluetooth. 6 State The on-board LED attached to the state pin can be used as feedback to see if Bluetooth is functioning properly.

7 LED Indicates the status of Module Blink once in 2 sec: Command Mode Repeated Blink: Waiting for connection in Data Mode Blink twice in 1 sec: Connection successful in Data Mode 8 Button Used to control the Key/Enable pin to switch between Data Mode and command Mode HC-05 Default Values: Bluetooth Name: “HC-05” Password: 1234 or 0000 Communication: Slave Mode: Data Mode Data Mode Baud Rate: 9600, 8, N, 1 Applications Can be used for wireless communication between two microcontroller units.

Communicate with Laptop mobile phones etc. Data Logging Wireless Robots DIY Home Automation Projects GPS-based DIY projects.

Specifications

Brand
Botroniq
SKU
DTIFCB1428

Related products