M5 Stack SERVO2 Module 16 Channels - 13.2 (PCS9685)
₹2,305 (incl. GST) · Out of stock
Brand: M5 Stack · Category: M5 Stack
Description
SERVO 2 is an updated servo driver module in the M5Stack stackable module series. It uses a PCA9685 16 channel PWM controller to control 16 channel servos at the same time. The power input is 6-12V DC and two SY8368AQQC chips are used for voltage reduction. 5A * 2), and the maximum output power of a single-channel is 25W (5V / 5A).
When the battery base is used for the power supply, the maximum output power is 5V / 2A. The module communicates with the host directly through I2C (the default address is 0x40) however the I2C address can be changed(0x40 - 0x47) through the dial switch. This also means that multiple Servo 2 modules can be stacked and used simultaneously. There is a power switch on the board to control the power supply of Servo 2.
Note: The module must use the external power supply of the DC interface when driving the servo. When using the AXP192 power management chip's main control (such as CORE2), the M-BUS power mode needs to be configured as an input when the program is initialized. Applications: Humanoid robot Bionic multi-joint robot 3-axis steering gear pan tilt
Specifications
- Brand
- M5 Stack
- SKU
- DTIFM50014
Related products
- M5 Stack Catch Unit (SG92R) – ₹1,149 (out of stock)
- M5 Stack Earth Moisture Unit – ₹465 (out of stock)
- Color Sensor RGB Unit (TCS3472) (322) – ₹1,249 (out of stock)
- M5 Stack Esp32 downloader kit – ₹626 (out of stock)
- M5Stamp Pico Mate with Pin Headers – ₹680 (out of stock)
- M5Stack ATOM Matrix – ₹1,718 (out of stock)
- M5 Stack Grove-T Connector (5pcs) – ₹505 (out of stock)
- M5StickC ESP32-PICO Mini IoT Development Kit – ₹2,931 (out of stock)