Botroniq

Arduino EK Wifi Starter Kit

Arduino EK Wifi Starter Kit

₹1,519 (incl. GST) · Out of stock

Brand: Botroniq · Category: Arduino Original Kits

Description

The Arduino UNO EK R4 WiFi Starter Kit is a versatile beginner-friendly package crafted for electronics prototyping, IoT and embedded applications. At its core is the UNO EK R4 board, which combines a 32-bit Renesas R7FA4M1AB3CFM microcontroller with an ESP32-S3 module for Wi-Fi and Bluetooth connectivity, alongside a 12×8 programmable LED matrix.

It boasts 256 kB flash, 32 kB SRAM, 8 kB EEPROM, a 14-bit ADC, DAC channels and CAN bus interface. Code uploads in seconds over USB-C, while onboard regulators accept 6–24 V inputs. The kit includes a 400-tie-point solderless breadboard, 220 ? resistor, active buzzer, DHT11 humidity/temperature sensor, male jumper wires and five 5 mm LEDs (red, green, blue, white and yellow).

These components let you build weather stations, alarm buzzers and interactive displays. Compatible with the Arduino IDE and C/C++ libraries, it’s ideal for students, makers and educators seeking hands-on learning and rapid prototyping. Explore systems, connect cloud services via Wi-Fi and bring electronic ideas to life with this toolkit.

Arduino EK Wifi Starter Kit Contains: Original Arduino UNO EK R4 WiFi The board merges a Renesas R7FA4M1AB3CFM (Cortex-M4F) MCU with an ESP32-S3 module for Wi-Fi and Bluetooth. It features a 12×8 RGB LED matrix, 256 kB flash memory, 32 kB SRAM, 8 kB EEPROM and standard digital/analog headers. 220-ohm Resistor A ¼ W carbon-film resistor with 220 ?

resistance and ±5% tolerance, perfect for limiting current to LEDs, sensors or buzzers. Axial leads fit snugly into solderless breadboards for quick circuit prototyping and testing. Type-C USB Cable (1 m) Durable 1 m USB-C to USB-A cable delivers 5 V/3 A power and high-speed data transfer. Nylon-braided jacket resists kinks and wear, ensuring reliable connection between your computer and Arduino board.

3 V to 5 V logic levels. Mountable PCB module includes transistor switch and resistor, enabling direct GPIO control for alarms, tones and notifications. 1? pitch layout with continuous power rails. No-solder design allows rapid insertion of ICs, resistors, LEDs and jumper wires for flexible circuit assembly.

DHT11 Humidity & Temperature Sensor Module Digital sensor module measuring 20–90% RH humidity (±5% accuracy) and 0–50 °C temperature (±2 °C accuracy). Uses a single-wire communication protocol and includes pull-up resistor and header pins for breadboard use. 1? pitch male connectors. Flexible silicone insulation rated for 300 V/3 A makes them ideal for reliable connections on breadboards, sensors and modules.

3 V and 20 mA operating current. Long-lead anode and short-lead cathode simplify orientation in prototype circuits. List of Projects that can be with the Arduino EK Wifi Starter Kit WiFi Weather Monitor Smart Temperature Alert System Local Temperature Display WiFi LED Controller (IoT) Temperature-Triggered Alarm IoT Humidity Logger LED Blinker with Web Control Visual Environment Indicator

Specifications

Brand
Botroniq
SKU
TIFCB1624

Related products