0.96in 6 pin OLED Display

Description

44 cm) OLED Display Module is a precise small, This OLED module can be interfaced with any microcontroller using SPI protocol. It is having a resolution of 128x64. OLED (Organic Light-Emitting Diode) is a self-lighting technology that consists of a thin, multi-layered organic film sandwiched between an anode and a cathode. OLED, unlike LCD technology, does not require a backlight.

OLED has a wide range of applications and is widely regarded as the ultimate technology for the next generation of flat-panel displays. The basic structure of an OLED Display Module is made up of organic materials sandwiched between the cathode and the anode, which is made of electric conductive transparent Indium Tin Oxide (ITO).

The organic materials form a multi-layered thin film that includes the Hole Transporting Layer (HTL), Emission Layer (EML), and Electron Transport Layer (ETL) (ETL). By applying the appropriate electric voltage, holes and electrons from the anode and cathode are injected into the EML. Inside the EML, holes and electrons combine to form excitons, which cause electroluminescence.

The key factors that determine the quality of OLED components are the transfer material, emission layer material, and electrode selection. It can be used with either an SPI or a USB interface, which can be selected by soldering two jumpers on the back. The design is entirely 5v-geared, with an onboard regulator and built-in raise converter.

It's now easier than ever to connect your 3v or 5v microcontroller without the use of a stage shifter.

If you want to use this OLED display module in your Arduino project, for that you will need few essential components like Jumper wires Breadboard Batteries or power supply Features: Better resolution and viewing angle than traditional LEDs Support for bit map images Bright and crisp display under various lighting conditions Only Need 2 I/O Port to Control Full Compatible with Arduino Pin Description: GND: power ground.

3V or 5V power supply. SCL: CLK Clock. SDA: MOSI data. RST: Reset. DC: Data / Command.

Specifications

Brand

Botroniq

SKU

TIFDP0037

Related products

• 0.96 Inch OLED Display Module SPI/I2C 4pin Blue Color – ₹169 (out of stock)
• 0.91 inch Blue OLED Display Module – ₹159 (out of stock)
• 1.3 Inch I2C OLED Display Module 128×64 4-Pin Blue – ₹308 (out of stock)
• 0.96 Inch I2C/IIC 4-Pin OLED Display Module -WHITE – ₹219.48 (out of stock)
• 0.96 Inch SPI OLED LCD Module 6pin (with VCC GND) SSD1306 Chip – ₹201.78 (out of stock)
• 1.3Inch SPI OLED LCD Module 6pin (with GND VCC) White SH1106 Chip – ₹260.78 (out of stock)
• Waveshare 2.42inch OLED Display Module, 128×64 Resolution, SPI / I2C Communication (White) – ₹1,438.42 (out of stock)
• Waveshare 0.96inch OLED Display Module, 128×64 Resolution, SPI / I2C Communication version C (upper yellow & lower blue) – ₹523.92 (out of stock)